top of page
Mark_edited.jpg

PARKSIDE IS A HIGH-PROFORMANCE, ECO-FRIENDLY TUBELESS TIRE SEALANT TRUSTED BY CYCLISTS ON CHALLENGING TRAILS ACROSS THE SOUTHWEST. WE CONTINUALLY TEST OUR PRODUCT ON SOME OF THE HARSHEST TRAILS IN SOUTHERN CALIFORNIA, OREGON, UTAH, AND ARIZONA

NON.png

HOW TO INSTALL

ALWAYS BE CERTAIN YOUR TUBELESS WHEEL TAPE IS CLEAN AND FREE OF ANY LEAKS.

OPTION 1: REMOVE ALL THE AIR FROM YOUR TIRE. REMOVE YOUR VALVE CORE. USING YOUR FAVORITE SEALANT INJECTOR, INJECT THE APPROPRIATE AMOUNT OF SEALANT TO YOUR TIRE SIZE. INSTALL THE VALVE CORE, AND INFLATE THE TIRE TO YOUR NORMAL RIDING PRESSURE.

 

WE RECOMMEND USING THE PARK TOOL TSI-1 TUBELESS SEALANT INJECTOR.

OPTION 2: REMOVE ALL THE AIR FROM YOUR TIRE. PULL A BEAD FROM ONE SIDE OF YOUR TIRE USING YOUR FAVORITE TIRE LEVERS. POUR THE APPROPRIATE AMOUNT OF SEALANT INTO YOUR TIRE. INSTALL THE TIRE BEAD BACK ONTO THE RIM, THEN USE YOUR FAVORITE AIR COMPRESSOR TO INFLATE THE TIRE TO YOUR NORMAL RIDING PRESSURE.

RECOMMENDED
DOSAGE PER TIRE

ROAD 700 2oz  /  59.147 ML

CYCLO CROSS 3oz  /  88.720 ML

26" MTB 3oz  /  88.720 ML

27.5" MTB 4oz  /  18.294 ML

29" MTB 5oz  /  147.868 ML

FAT 8oz  /  236.588 ML

SOME OF OUR IN-HOUSE TESTING

TIRE / SEALANT TESTING
TIRE / SEALANT TESTING

2mm - 22psi start / 21.5psi finish
(test time 0.5 seconds)

TIRE / SEALANT TESTING
TIRE / SEALANT TESTING

4mm - 22psi start / 18psi finish
(test time 3.2 seconds)

TIRE / SEALANT TESTING
TIRE / SEALANT TESTING

Drywall Screw - 22psi start / 19psi finish
(test time 2.8 seconds)

Parkside tubeless tire sealant is Chuck approved

bottom of page